The Rxl stainless-steel liquid level sensor is available up to 1500mm long, designed specifically for applications where monitoring of corrosive fluids (water, coolant, salt water, chemicals) is required, or where specific materials compatibility standards must be met (typical within medical and food processing industries).
The sensor features the same standard SAE 5-bolt mounting pattern as the shorter R-Series stainless-steel liquid level sensor, with additional mechanical strengthening features on the underside of the flange to support the longer sensor probe length.
The sensor utilises capacitive technology, with fully integrated electronics that provide a fully configurable 0-5V analogue output over the calibrated sensing range. Each sensor is factory calibrated in the specified liquid type (or equivalent).
Features & Benefits- Stainless steel construction
- SAE 5-bolt flange mount with Tube support
- Available up to 1500mm long
- Suitable for use with salt water, fresh water, coolant, acids and chemical-based liquids. Please contact us to confirm compatibility with specialist liquids.
- Solid-state capacitive technology - no moving parts.
- 0-5V Analogue output (configurable)
- Factory Calibrated
- -40°C to +125°C Operating Temperature
// Extra-long Stainless-steel Sensor for Deep Tanks
Rxl Liquid Level Sensor- Length: 80mm to 1500mm
- Construction: Stainless-steel
- V Supply: +6V to +24V
- Output: 0-5V (Calibrated 0.25-4.75V)
| Supply Voltage | +6VDC to +24VDC |
| Supply Current | <10mA @12V |
| Serial Interface | RS232 (+5V) |
| Resolution | 10 bit |
| Sample Rate | 10Hz, 40Hz & 80Hz |
| Voltage Output Range | 0.25V - 4.75V over sensing range |
| Range Accuracy | ±1% of medium depth @20°C |
| Wire | 0.5m Flying Lead unless specified |
| Wiring Gauge | Typically 26 AWG Raychem type SS(options up to 20 AWG if requested) |
| Cable Material | Wiring sleeved with either Fluorocarbon or Raychem DR25, or customised to customer specifications. |
| Red | V+ (Power) |
| Black | V- (GND) |
| Orange | Analogue signal 0.25V to 4.25V |
| Green | Serial Rx |
| White | Serial Tx |
| Probe Length | 80 - 1500mm (customer to specify) |
| Mounting | SAE 5-Bolt Pattern |
| Weight | From 300g (dependant on length) |
| Product Datasheet |
| Protection Class | IP67 |
| Operating Temperature | -40°C to +125°C |
| EMC Immunity Level | SAE J1113/2 1996 |
| Main Construction | Stainless-steel |
| Fuel | Gasoline, Unleaded, LRP, Jet Fuel, Avgas |
| Oil | Engine oils, transmission oils, steering & hydraulic fluids, Diesel, Heavy Oil |
| Bio-Fuel | Ethanol E100, E85, E50, E10 Methanol |
| Other | Salt water, Coolant, Acids. Please consult Gill for otherliquid compatibilities |
| 1612-00-019 | |
| For shorter sensors or aluminium variants please visit the R-Series range page. | |
|---|---|
| GA Drawing |
|---|
| Sensor Tip Support Boss |