- Switch Overview
- Typical Specifications
Liquid Level Switch
The Gill standard liquid level switch is a compact, lightweight design with integrated electronics. The switch can be fully submersed in fuel or oil and features two mounting holes for simple installation.
The switched 0-5V analogue output is fully configurable over the measurement range and can be set to switch at any point over the 25mm probe length. As standard, this liquid level switch is factory calibrated to switch from 4.5V to 0.5V at 13.5mm from the tip of the sensor.
The sensor can be mounted in any orientation in the tank and features a face-mounted flying lead to simplify installation.
Electrical
Supply Voltage
+6VDC to +31VDC
Supply Current
<10mA @12V
Serial Interface
RS232 (+5V)
Resolution
10 bit
Sample Rate
80Hz
Analogue Switch Output
Voltage Output Range
0.25V - 4.75V
Switch Voltage Accuracy
±0.25% of medium depth @20ºC
Wiring
Wire
Flying Lead
Wiring Gauge
Typically 26 AWG (options up to 20 AWG if requested)
Cable Material Compatibility
Wiring sleeved with either Fluorocarbon or Raychem DR25, or customised to customer specifications.
Mechanical
Dimensions
38mm x 44mm x 44mm
Mounting
2 x 4.1mm holes on 32mm centres
Weight
70g
Environmental
Protection Class
IP68
Operational Temperature
-40ºC to +125ºC
EMC Immunity Level
SAE J1113/2 1996
Finish
Optional anodised finish to DEF STAN 025
Compatible Medium
Fuel
Gasoline, Unleaded, LRP, Jet Fuel, Avgas
Oil
Engine oils, transmission oils, steering & hydraulic fluids, Diesel, Heavy Oil
Other
Please consult Gill for other liquid compatibilities