Sensor Service Unit
The Portable Sensor Service Unit is light and compact and useable with any Gill liquid level sensor. The minimum and maximum liquid level is set using the simple user interface provided via the graphical LCD display and push buttons.
The sensor will then be calibrated to provide a highly accurate linear analogue output between these points. The liquid level voltage can also be displayed in real time enabling the user to easily check the settings are correct. Power is provided to the sensor when connected to the Service Unit, increasing the ease of calibration as no separate power supply is required. To conserve battery life, an automatic ‘power down’ feature has been incorporated into the unit.
- Features
- Specifications
- Documentation
- Simple Sensor Calibration
- 'On Car' Calibration Ability
- Real-time Monitoring of Sensor Performance
- Fully Calibrate a Sensor in 30 Secs
- Sensor Powered by Service Unit No Need for Seperate Power Supply
|
| General |
| Screen |
Graphical LCD 50mm x 25mm |
| Power Source |
PP3 9V Battery |
| Rubber Ergonomic Grip |
Yes |
| Power Saving Function |
Yes |
| Auto Power-on |
Yes |
| Compatibility |
| Compatible Sensors |
M-Series Liquid Level Sensors
R-Series Liquid Level Sensors |
| Wiring |
| Connector |
9-way D-Type |
| Options |
Wiring loom with connectors |
| Mechanical |
| Overall Size |
120mm x 80mm x 25mm (W x H x D) |
| Weight |
180g |
| Environmental |
| Protection class |
IP54 |
| Operational temperature |
0ºC to +70ºC |
| Impact Resistance |
IK06 |
| Vibration |
15g RMS (24-2000Hz) & SAE J1455 design guidelines used |
Product Literature
|
|
|
|
|
|
|
